A proud homeowner wants the brickwork on his or her residence to look fresh and bright. Tuck pointing Indiana can rejuvenate your brick walls or chimney and make them like-new. Consider the price but also, think about how close you are to the business you call on to do the work.
This trade was developed in Great Britain in the eighteenth century. It was meant to give the appearance of brickwork without the cost of using gauged bricks. Gauged bricks were made larger than required and then fired. After that they were cut to the correct size by cutting them down on all sides. The bricklayer used white mortar made of lime. The contrast of the white with red bricks is a very attractive look.
Tuck Pointing gave the same appearance, but was relatively inexpensive. Low cost unrubbed bricks were laid using mortar that was the same color. The red bricks were used originally and blue-black bricks were used later on. A fine line of white color pipeclay or putty was inserted into the same-color mortar before it dries. The name was taken from a rudimentary technique that used a thin line drawn on the bricks that they did not fill with any material, neither mortar or putty.
Professional metal trowels are used to execute this work. They are called tuckpointing irons and sometimes jointers. These names are what they are called in UK. The front of the metal trowel is a sharp point. It has a flat base. A wooden handle is attached to the metal trowel using a brass fitting. The fitting is called the ferrule.
You can do an excellent job of fixing a chimney with tuck pointing. It is in need of rehabilitation if it has a loss of mortar, loosened bricks, split bricks or empty spaces where the mortar has fallen out. The necessary materials to do the job are type N masonry cement, sand, a pail, a pastry bag and something to mix the mortar in. Start the job by removing any loose mortar on the chimney. Next mix the sand with the cement. Use a two to one measure, two parts sand to one part cement.
Check to make sure the mixture is the right consistency by holding a trowel full upside down and the mixture should not fall off. It should, however, slide off the trowel when flung towards one side. It is important to get it just right. Cut an opening in your pastry bag and wet the bricks by spraying them with water. Fix one small portion at a time. Always keep the bricks damp as you work.
To complete the job, smooth out all the mortar and let it dry. Your chimney should be perfect after tuck pointing Indiana completes the repair. Although tuck pointing is not used as extensively as it once was, it is very useful when applied to chimneys in need of repair. Any homeowner will be pleased with the professional look that he or she will be pleased with.
Tuck Pointing Indiana
This trade was developed in Great Britain in the eighteenth century. It was meant to give the appearance of brickwork without the cost of using gauged bricks. Gauged bricks were made larger than required and then fired. After that they were cut to the correct size by cutting them down on all sides. The bricklayer used white mortar made of lime. The contrast of the white with red bricks is a very attractive look.
Tuck Pointing gave the same appearance, but was relatively inexpensive. Low cost unrubbed bricks were laid using mortar that was the same color. The red bricks were used originally and blue-black bricks were used later on. A fine line of white color pipeclay or putty was inserted into the same-color mortar before it dries. The name was taken from a rudimentary technique that used a thin line drawn on the bricks that they did not fill with any material, neither mortar or putty.
Professional metal trowels are used to execute this work. They are called tuckpointing irons and sometimes jointers. These names are what they are called in UK. The front of the metal trowel is a sharp point. It has a flat base. A wooden handle is attached to the metal trowel using a brass fitting. The fitting is called the ferrule.
You can do an excellent job of fixing a chimney with tuck pointing. It is in need of rehabilitation if it has a loss of mortar, loosened bricks, split bricks or empty spaces where the mortar has fallen out. The necessary materials to do the job are type N masonry cement, sand, a pail, a pastry bag and something to mix the mortar in. Start the job by removing any loose mortar on the chimney. Next mix the sand with the cement. Use a two to one measure, two parts sand to one part cement.
Check to make sure the mixture is the right consistency by holding a trowel full upside down and the mixture should not fall off. It should, however, slide off the trowel when flung towards one side. It is important to get it just right. Cut an opening in your pastry bag and wet the bricks by spraying them with water. Fix one small portion at a time. Always keep the bricks damp as you work.
To complete the job, smooth out all the mortar and let it dry. Your chimney should be perfect after tuck pointing Indiana completes the repair. Although tuck pointing is not used as extensively as it once was, it is very useful when applied to chimneys in need of repair. Any homeowner will be pleased with the professional look that he or she will be pleased with.
Tuck Pointing Indiana
RSS Feed (xml)
Niciun comentariu:
Trimiteți un comentariu